Exchange Rate : 1 EUR = 4.8206 RON

Cart

0
You have no items in your shopping cart.

0

×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Multi-tunnel greenhouse

Multi-tunnel greenhouse

Dimensions for Multi-tunnel Greenhouses

Module widthGutter heightRidge height
8m 2,35-4,00m 4,25-5,90m
9m 2,35-4,00m 4,55-6,20m
10m 2,35-4,00m 4,70-6,35m

Greenhouses with Multi-tunnels

Structure

The greenhouse is designed to resist to difficult climate conditions, such as the ones in our country (Romania) and in Europe.

Climate in Romania

The metallic structure is made of E260 steel, with Sendzimir 275g Zn/sqm galvanization. The steel is designed specially for greenhouses and tunnels, because it is very resistant in a corrosive environment. The steel impact- and distortion-resistant, with a smooth surface thus protecting the film against premature wear.

The arches are placed every 2,5m (optionally every 2,0m).

The components have the following dimensions:
- arches - Ø60×1,5mm
- lattices - Ø28×1,5mm
- trellis - Ø33,7x2mm
- lateral polls - Ø60×2,5mm
- profiles for enforcement of gables - 80x80x2,5mm

The structure is fixed in reinforced concrete blocks. On the ends, the structure has supplementary bracing for increased resistance.

Coverage

Professional three-layered film of 200 microns, resistant to ultraviolet (UV), elongation 600% (EVA), exterior anti-dust layer, interior anti-condensation layer, 90% transparency and 25% diffusion. Warranty for 45 months and lifespan of approximately 72 months.

The three layers are as follows:

  • Exterior layer: resistant and anti-adherent, provided with UV additives;
  • Central layer: thermal: high content of EVA, assures the film is thermal;
  • Interior layer: provides better light diffusion and co-stabilizers for pesticides.

Double film. The option for coverage with double inflated film is also made using 200 microns film, with an air cushion for thermal insulation. The pressure is controlled with a pressure sensor.

The film is fixed on the structure using aluminum profiles with PVC rods, this being the most qualitative way of clipping the film.

Multi-tunnel Greenhouse - professional polyfilm
Multi-tunnel Greenhouse - professional polyfilm
Multi-tunnel Greenhouse - professional polyfilm

Natural ventilation (openings)

According to preferences, the type of plants, the seasonality of the crops or the dimensions of the greenhouse, one may opt for natural ventilation as follows:

Lateral/Side opening

Can be made on both sides of the greenhouse.

Lateral opening is made by rotary tube, film being rolled upward. This can be manually operated by a manual worm gear unit or by electric power drive.

Rotating tube can be made of steel or aluminum. For better thermal insulation, the lateral opening can be provided with double inflated film.

Roof/Top opening

Top opening is a must especially for more than 2 modules greenhouses. It is very efficient for cooling and for natural ventilation of the greenhouse in the hot weather season.

The system is designed on rotating tube with rack and pinion type of system.

Technical data:

  • Width of the opening is 2,0m for 1 opening per module, or 1,5m for double opening (butterfly type).
  • Rotating tube is 33,7x2mm or 33,7x3mm (depending of the length of the opening).
  • Rack and pinions (Lock type) at every arch.
  • Power drives (also Lock type) with high torque and 230 or 380V voltage.

The opening is controlled using a control panel with wind, rain and temperature (internal and external) sensor.

Optionally, the openings can be equipped with anti-insects net to protect the crops.

Gable opening

It is made through manual opening of a window on both gables.

The system is designed on rotating tube with rack and pinion type of system.

It is an easy ventilation solution for the colder seasons, when the lateral and roof openings would cool the greenhouse too quickly.

Multi-tunnel Greenhouse - Side opening

 

Multi-tunnel Greenhouse - Roof opening
Multi-tunnel Greenhouse - Lateral opening
Multi-tunnel Greenhouse - Roof opening
Multi-tunnel Greenhouse - Gable window

Access

The access in the greenhouse is made both through the gables and through the lateral side of the greenhouse.

Options for access:

      • PVC Pedestrian door 0,9x2m with 24mm glass
      • 2x2,2m Sliding door plated with 6mm polycarbonate
      • 3x2,2m Double sliding door plated with 6mm polycarbonate

You can download the brochure here:


For a personalized quote, please inquire at the following email address office@seretransilvania.ro or phone number +40-264.401.122.

Multi-tunnel Greenhouse
Multi-tunnel Greenhouse
Multi-tunnel Greenhouse
Multi-tunnel Greenhouse
Multi-tunnel Greenhouse
Multi-tunnel Greenhouse
Sere Transilvania on Google Maps
© S.C. Sere Transilvania S.A. All Rights Reserved.